FIB/1/hwFIBOverloadForward_active: The interface board is in the overload forwarding state because the FIB module is overloaded. (EntityPhysicalIndex=[EntityPhysicalIndex], HwBaseTrapSeverity=[HwBaseTrapSeverity], HwBaseTrapProbableCause=[HwBaseTrapProbableCause], HwBaseTrapEventType=[HwBaseTrapEventType], HwFibOverloadModule=[HwFibOverloadModule], entPhysicalName=[entPhysicalName])
In VS mode, this log is supported only by the admin VS.
The interface board is in the overload forwarding state because the FIB module is overloaded.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
The index for this entry. |
|
HwBaseTrapSeverity |
The level of trap. |
|
HwBaseTrapProbableCause |
The probable cause. |
|
HwBaseTrapEventType |
The type of trap. |
|
HwFibOverloadModule |
Module is FIB4 or FIB6. ATN950B: Module is FIB4. |
|
entPhysicalName |
The textual name of the entity. |
The number of IPv4 route entries or IPv6 route entries exceeded the specification of the forwarding engine route entries.