DEVM/1/hwFanRemove_active

Message

DEVM/1/hwFanRemove_active: A fan module was removed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Description

A fan module was removed.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

A fan module was removed.

Procedure

1.Check whether the fan module is properly installed in the slot.

If so, replace the fan module.
If not, install the fan module properly.

2.If the alarm still exists, collect trap, log, and configuration information, and contact technical support personnel.

3.End.