DRIVER/3/hwFlexEGrpNegotiationFail_active

Message

DRIVER/3/hwFlexEGrpNegotiationFail_active: FlexE group negotiation fail alarm. (GroupIndex=[hwFlexEGroupIndex],GroupName=[hwFlexEGroupName])

In VS mode, this log is supported only by the admin VS.

Description

FlexE group negotiation fail alarm.

Parameters

Parameter Name	Parameter Meaning
hwFlexEGroupIndex	Index of FlexE group.
hwFlexEGroupName	Name of FlexE Group.

Possible Causes

Static mode and dynamic mode docking, dynamic mode one side of the negotiation failed.

Procedure

1. Check whether the timeslot negotiation modes configured for the groups at both ends are consistent.

If yes, go to step 3.
If no, go to step 2.

2. Run the timeslot-negotiation mode command to configure the same timeslot mode for the two groups at both ends, that is, static mode or dynamic negotiation mode. Then, check whether the alarm is cleared.

If yes, go to step 4.
If no, go to step 3.

3. Collect alarm, log, and configuration information, and contact technical support personnel.

4. End.