DEVM/1/hwFlexEPhyDelayOverAlarm_active

Message

DEVM/1/hwFlexEPhyDelayOverAlarm_active: The delay difference of FlexE physical interfaces in the same group is abnormal.(hwPhysicalIndex=[hwPhysicalIndex], hwPhysicalPortList=[hwPhysicalPortList])

In VS mode, this log is supported only by the admin VS.

Description

The delay difference of FlexE physical interfaces in the same group is abnormal

Parameters

Parameter Name	Parameter Meaning
hwPhysicalIndex	Physical Index.
hwPhysicalPortList	Physical interface List.

Possible Causes

The delay difference of FlexE physical interfaces in the same group is abnormal.

Procedure

1.Use same fiber paths between the FlexE physical interfaces in the same group.Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm is not cleared, go to Step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.