DEVM/2/hwFlexEPhyGroupMismatch_active

Message

DEVM/2/hwFlexEPhyGroupMismatch_active: The configured group IDs did not match for the two connected FlexE physical interfaces.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName], hwPhysicalPortLocalGroupID=[hwPhysicalPortLocalGroupID], hwPhysicalPortRemoteGroupID=[hwPhysicalPortRemoteGroupID])

In VS mode, this log is supported only by the admin VS.

Description

The configured group IDs did not match for the two connected FlexE physical interfaces.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.
hwPhysicalPortLocalGroupID	Local group id value.
hwPhysicalPortRemoteGroupID	Remote group id value.

Possible Causes

The configured group IDs did not match for the two connected FlexE physical interfaces.

Procedure

1.Configure group IDs of the two connected FlexE physical interfaces be the same.Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm is not cleared, go to Step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.