DEVM/3/hwFlexEPhyLocalFaultAlarm_active

Message

DEVM/3/hwFlexEPhyLocalFaultAlarm_active: The local fault alarm of FlexE physical interface has occurred.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Description

The local fault alarm of FlexE physical interface has occurred.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

Possible Causes

The received data is abnormal.

Procedure

1.Check whether the connected FlexE physical interfaces all work in FlexE mode.

If so, go to Step 3.
If not, go to Step 2.

2.Switch the connected FlexE physical interface to FlexE mode. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 3.

3.Collect alarm information, log information and configuration information, and then contact technical support personnel.

4.End.