DEVM/3/hwFlexEPhyRemoteFaultAlarm_active

Message

DEVM/3/hwFlexEPhyRemoteFaultAlarm_active: The remote fault alarm of FlexE physical interface has occurred.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

In VS mode, this log is supported only by the admin VS.

Description

The remote fault alarm of FlexE physical interface has occurred.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

Possible Causes

The remote FlexE physical interface has faults.

Procedure

1.Clear the FlexE local fault alarm of remote FlexE physical interface, Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm is not cleared, go to Step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.