GRESM/3/hwFpResourceThresholdExceed_active

Message

GRESM/3/hwFpResourceThresholdExceed_active: The number of FP reseource exceeded the upper threshold.( hwFpId=[FPId], hwFpResourceType=[ResourceType], hwFpResourceCurrentCount=[ResourceCurrentCount], hwFpResourceTotalCount=[ResourceTotalCount],hwFpResourceThresholdUpperLimit=[FpResourceThresholdUpperLimit], hwFpResourceThresholdLowerLimit=[FpResourceThresholdLowerLimit])

In VS mode, this log is supported only by the admin VS.

Description

FP resource usage reached the upper threshold of 80%.

Parameters

Parameter Name	Parameter Meaning
FPId	FP index
ResourceType	Resource type
ResourceCurrentCount	Number of used resources
ResourceTotalCount	Total number of resources
FpResourceThresholdUpperLimit	Upper threshold
FpResourceThresholdLowerLimit	Lower threshold

Possible Causes

The proportion of used FP resources to all resources reached the upper threshold of 80%.

Procedure

1. Obtain the FP index based on the hwFpiId parameter carried in alarm information and the resource type based on the hwFpResourceType parameter.

2. Reduce the number of the specified type of resource that can be used or the configurations or messages that use the resources, which reduces resource consumption. Check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 4.

3. Collect log messages and contact Huawei technical support personnel.

4. End.