GRESM/2/hwFpResourceTotalCountExceed_active

Message

GRESM/2/hwFpResourceTotalCountExceed_active: The number of FP reseource exceeded the maximum value.( hwFpId=[FPId], hwFpResourceType=[ResourceType], hwFpResourceCurrentCount=[ResourceCurrentCount], hwFpResourceTotalCount=[ResourceTotalCount])

In VS mode, this log is supported only by the admin VS.

Description

FP resource usage reached 100%.

Parameters

Parameter Name	Parameter Meaning
FPId	FP index
ResourceType	Resource type
ResourceCurrentCount	Number of used resources
ResourceTotalCount	Total number of resources

Possible Causes

The maximum number of FP resources were used.

Procedure

1. Obtain the FP index based on the hwFpiId parameter carried in alarm information and the resource type based on the hwFpResourceType parameter.

2. Reduce the number of the specified type of resource that can be used or the configurations or messages that use the resources, which reduces resource consumption. Check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 4.

3. Collect log messages and contact Huawei technical support personnel.

4. End.