IPSEC/4/hwIPSecIKEV1UnsupportedAlarm_active: The local device does not support IKE V1 service.
In VS mode, this log is supported only by the admin VS.
1. If the IKEv1 service does not need to be set up with the peer device, ignore this alarm. 2. If IKEv1 services need to be established between the local device and the peer device, install and enable the IKEv1 patch.Check whether the alarm is cleared. - If the alarm persists, go to step 3. - If the alarm is cleared, go to step 4. 3. Collect alarm, log, and configuration information, and contact Huawei technical support personnel. 4. End.