IPSEC/4/hwIPSecPkiWhitelistCnNumberTrap_active

Message

IPSEC/4/hwIPSecPkiWhitelistCnNumberTrap_active: The number of data in PKI whitelists reached the alarm threshold. (Threshold=[WhitelistThrehold], Current Number=[WhitelistCount])

Description

The number of PKI whitelists reached the alarm threshold.

Parameters

Parameter Name	Parameter Meaning
WhitelistThrehold	Alarm threshold for the number of imported whitelists
WhitelistCount	Number of imported whitelists

Possible Causes

Cause 1: The number of imported whitelists reached the alarm threshold.
Cause 2: The alarm threshold was set too low.

Procedure

Cause 1: The number of imported whitelists reached the alarm threshold.
1. Run the undo pki import whitelist filename command to delete unnecessary whitelists.
- If the alarm is cleared, go to 3.
- If the alarm persists, go to 2.
2. Collect alarm information and configuration information, and then contact technical support personnel.

3. End.
Cause 2: The alarm threshold was set too low.
1. Run the pki whitelist capacity warning-threshold command to increase the alarm threshold.
- If the alarm is cleared, go to 3.
- If the alarm persists, go to 2.
2. Collect alarm information and configuration information, and then contact technical support personnel.

3. End.