BRASAAA/4/hwIPv6NDRAPrefixLowerlimitWarningAlarm_active
Message
BRASAAA/4/hwIPv6NDRAPrefixLowerlimitWarningAlarm_active: The IPv6 NDRA prefix usage of the domain [domainName] fell below the lower threshold. (Domain index = [domainIndex],MinThreshold=[threshold])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
domainName |
Name of the domain |
|
domainIndex |
Index of the domain |
|
threshold |
Lower limit, in percentages. If the value is 80,the threshold is 80% |
Possible Causes
Cause 1: A large number of users logged out.
Cause 2: The configured lower limit was too high.
Procedure
1.Run the display domain domain-name command in the system view to check whether the lower limit is appropriate.
- If the lower limit is too high, go to Step 2.
- If the lower limit is appropriate, go to Step 3.
2.Run the ipv6-warning-threshold lower-limit command in the AAA domain view to reconfigure the lower limit.
3.Run the display domain domain-name command in the system view to check the current IPv6 address usage.
- If the IPv6 address usage falls to or approaches the lower limit, run the display aaa offline-record brief command to check whether the logout reason is User request to offline.
- a.If the logout reason is User request to offline, no action is required.
- b.If the logout reason is not User request to offline, contact technical support personnel.
- If the IPv6 address usage is an appropriate value, go to Step 4.
4.Collect trap, log, and configuration information, and contact technical support personnel.
5.End.