DEVM/4/hwIfMonitorInputRateRising_active

Message

DEVM/4/hwIfMonitorInputRateRising_active: Interface input flow bandwidth usage exceeded the trap threshold. (Interface=[IfIndex], BandWidthUsage=[hwSubIfInputRatePercentage], TrapThreshold=[hwSubIfInputRateThreshold], InterfaceName=[InterfaceName])

In VS mode, this log is supported only by the admin VS.

Description

Interface input flow bandwidth usage exceeded the trap threshold.

Parameters

Parameter Name	Parameter Meaning
IfIndex	Interface index .
hwSubIfInputRatePercentage	Input flow bandwidth usage.
hwSubIfInputRateThreshold	Trap threshold.
InterfaceName	Interface name.

Possible Causes

Interface input flow bandwidth usage exceeded the trap threshold.

Procedure

1.Run the display this interface command in the interface view to check whether the traffic volume threshold is proper for the actual service conditions.

If the threshold is too low, go to Step 2.
If the threshold is proper, go to Step 3.

2.Run the trap-threshold input-rate threshold_value command in the interface view to set a proper alarm threshold. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 3.

3.Collect the trap, log, and configuration information, and then contact technical support personnel.

4.End.