DEVM/1/hwIfMonitorSdhErrorRising_active

Message

DEVM/1/hwIfMonitorSdhErrorRising_active: The Sdh error is rising. (hwIfMonitorIndex=[hwIfMonitorIndex], hwIfMonitorSdhErrorStatistics=[hwIfMonitorSdhErrorStatistics], hwIfMonitorSdhErrorThreshold=[hwIfMonitorSdhErrorThreshold], hwIfMonitorSdhErrorInterval=[hwIfMonitorSdhErrorInterval], hwIfMonitorName=[hwIfMonitorName])

In VS mode, this log is supported only by the admin VS.

Description

The SDH error alarm.

Parameters

Parameter Name	Parameter Meaning
hwIfMonitorIndex	Index of physical port.
hwIfMonitorSdhErrorStatistics	Sdh error statistics value only for B3.
hwIfMonitorSdhErrorThreshold	Sdh error alarm threshold.
hwIfMonitorSdhErrorInterval	Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value.
hwIfMonitorName	Name of physical port.

Possible Causes

Cause 0: The optical module was faulty.
Cause 1: The optical fiber was faulty.

Procedure

1.Replace the optical module and then check whether the fault is rectified.

If so, go to End.
If not, go to step 2.

2.Replace the optical fiber, and then check whether the fault is rectified.

If so, go to End.
If not, go to step 3.

3.Collect alarm information, log information and configuration information, and then contact technical support personnel.