DEVM/2/hwIfMonitorTxPauseFrameRising_active: The threshold crossing alert of TX PAUSE appears. (hwIfMonitorIndex=[hwIfMonitorIndex], hwIfMonitorTxPauseFrameStatistics=[hwIfMonitorTxPauseFrameStatistics], hwIfMonitorTxPauseFrameHighThreshold=[hwIfMonitorTxPauseFrameHighThreshold], hwIfMonitorTxPauseFrameLowThreshold=[hwIfMonitorTxPauseFrameLowThreshold], hwIfMonitorTxPauseFrameInterval=[hwIfMonitorTxPauseFrameInterval], hwIfMonitorName=[hwIfMonitorName])
In VS mode, this log is supported only by the admin VS.
An alarm appears when the number of TX PAUSE frames reaches the alarm threshold within a specified period.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwIfMonitorIndex |
Index of physical port. |
|
hwIfMonitorTxPauseFrameStatistics |
Statistics about TX pause frames. |
|
hwIfMonitorTxPauseFrameHighThreshold |
Upper alarm threshold of TX pause frames. |
|
hwIfMonitorTxPauseFrameLowThreshold |
Lower alarm threshold of TX pause frames. |
|
hwIfMonitorTxPauseFrameInterval |
Detection interval of TX pause frame alarms. |
|
hwIfMonitorName |
Name of physical port. |
The number of TX PAUSE frames reaches the alarm threshold within a specified period.
1.Reduce the traffic transmitted by the remote interface, and then check whether the alarm disappears.
2.Collect alarm information, log information and configuration information, and then contact technical support personnel.