IPFPM/4/hwIpfpmDcpFlowConflict

Message

IPFPM/4/hwIpfpmDcpFlowConflict: The flow conflicts with another existing flow.(TestInstanceId=[InstanceId], FlowType=[FlowType], ConflictInstId=[ConflictInstanceId], ConflictFlowType=[ConflictFlowType])

Description

The flow characteristics of a specified target flow in an IP FPM instance conflict with the flow characteristics of a target flow that already exists in another IP FPM instance on the same DCP.

Parameters

Parameter Name	Parameter Meaning
InstanceId	IP FPM instance ID
FlowType	Target flow type
ConflictInstanceId	IP FPM instance ID in conflict
ConflictFlowType	Target flow type in conflict

Possible Causes

The flow characteristics of a specified target flow in an IP FPM instance overlap with the flow characteristics of a target flow that already exists in another IP FPM instance on the same DCP, causing a flow conflict alarm.

Procedure

1. Check whether the flow characteristics of a newly configured target flow in an IP FPM instance overlap with the flow characteristics of a target flow that already exists in another IP FPM instance on the same DCP.

If so, go to Step 2.
If not, go to Step 3.

2. Check the cause of the flow characteristics overlap and resolve the problem. Then check whether the alarm persists.

If so, go to Step 3.
If not, go to Step 4.

3. Collect log information and configuration information, and then contact technical support personnel.

4. End.