RM/4/hwIpv6PrefixThresholdExceed_clear

Message

RM/4/hwIpv6PrefixThresholdExceed_clear: The number of IPv6 prefixes fell below the threshold. (PrefixCount=[PrefixCount], MaxValue=[MaxValue], ThresholdLowerLimit=[ThresholdLowerLimit], ThresholdUpperLimit=[ThresholdUpperLimit])

Parameters

Parameter Name	Parameter Meaning
PrefixCount	Indicates the number of IPv6 route prefixes in the routing table.
MaxValue	Indicates the maximum number of IPv6 route prefixes supported by the device.
ThresholdLowerLimit	Indicates the lower threshold of IPv6 route prefixes.
ThresholdUpperLimit	Indicates the upper threshold of IPv6 route prefixes.

Possible Causes

The number of IPv6 prefixes fell below the clear alarm threshold.

Procedure

This alarm message is informational only, and no action is required.