FEI_L2/4/hwL2ProtoTunnelDropThresholdAlarm_active: The number of the protocol transmit on the port reach the drop threshold.(IfName=[ifname], ProtocolName=[protocolname], DropThreshold=[dropthreshold])
In VS mode, this log is supported only by the admin VS.
The number of protocol packets that were transparently transmitted at Layer 2 reached the drop threshold.
| Parameter Name | Parameter Meaning |
|---|---|
|
ifname |
Interface name. |
|
protocolname |
Protocol name. |
|
dropthreshold |
Threshold for dropping protocol packets transparently transmitted at Layer 2. |
1. Run the l2protocol-tunnel drop-threshold number all command to increase the maximum number of drop threshold. Check whether the alarm is cleared.
2.Collect trap, log, and configuration information, and contact technical support personnel.
3.End.