L2VPN/2/hwL2vpnOamLck_active

Message

L2VPN/2/hwL2vpnOamLck_active: OAM reported a LCK alarm. (ServiceType=[ServiceType], ProtocolType=[ProtocolType], VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr], IfIndex=[IfIndex], PwMaster=[PwMaster], RmtSiteID=[RmtSiteID], InLabel=[InLabel], OutLabel=[OutLabel], IfName=[IfName], VsiName=[VsiName])

Description

OAM received an LCK packet, indicating that the server layer (also known as section layer) of a tunnel had been locked.

Parameters

Parameter Name	Parameter Meaning
ServiceType	Type of the service: 0: VPWS. 1: VPLS.
ProtocolType	Type of the protocol: 0: SVC. 1: LDP. 2: BGP (not supported for the time being).
VcID	VC ID.
VcType	VC type.
PeerAddr	IP address of the peer.
IfIndex	Interface index.
PwMaster	PW identifier: 1: primary PW. 2: secondary PW.
RmtSiteID	Remote site ID.
InLabel	VC in-label.
OutLabel	VC out-label.
IfName	Interface name.
VsiName	VSI name.

Possible Causes

The server layer of a tunnel was locked.

Procedure

1. This alarm message is informational only, and no action is required.