L2VPN/3/hwL2vpnOamMeg_active

Message

L2VPN/3/hwL2vpnOamMeg_active: OAM reported an unexpected MEG alarm. (ServiceType=[ServiceType], ProtocolType=[ProtocolType], VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr], IfIndex=[IfIndex], PwMaster=[PwMaster], RmtSiteID=[RmtSiteID], InLabel=[InLabel], OutLabel=[OutLabel], IfName=[IfName], VsiName=[VsiName])

Description

OAM received unexpected MEG information.

Parameters

Parameter Name	Parameter Meaning
ServiceType	Type of the service: 0: VLL. 1: VPLS.
ProtocolType	Type of the protocol: 0: SVC. 1: LDP.
VcID	VC ID.
VcType	VC type.
PeerAddr	IP address of the peer.
IfIndex	Interface index.
PwMaster	PW identifier: 1: primary PW. 2: secondary PW.
RmtSiteID	Remote site ID.
InLabel	VC in-label.
OutLabel	VC out-label.
IfName	Interface name.
VsiName	VSI name.

Possible Causes

The MEG names configured on the local and remote MEPs were different.

Procedure

1. Perform the troubleshooting operations described in hwMplsTpOamUnExpectMeg to rectify the fault.

If the fault is rectified, go to Step 3.
If the fault persists, go to Step 2.

2. Contact the technical support personnel.

3. End.