L2VPN/3/hwL2vpnOamMismatch_clear

Message

L2VPN/3/hwL2vpnOamMismatch_clear: OAM reported the clearing of the Mismatch alarm. (ServiceType=[ServiceType], ProtocolType=[ProtocolType], VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr], IfIndex=[IfIndex], PwMaster=[PwMaster], RmtSiteID=[RmtSiteID], InLabel=[InLabel], OutLabel=[OutLabel], IfName=[IfName], VsiName=[VsiName])

Parameters

Parameter Name Parameter Meaning

ServiceType

Type of service: - 0: VLL - 1: VPLS

ProtocolType

Type of protocol: - 0: SVC - 1: LDP - 2: BGP (not supported)

VcID

VC ID.

VcType

VC type.

PeerAddr

IP address of the peer.

IfIndex

Interface index.

PwMaster

PW identifier: - 1: primary PW - 2: secondary PW

RmtSiteID

Remote site ID.

InLabel

VC in-label.

OutLabel

VC out-label.

IfName

Interface name.

VsiName

VSI name.

Possible Causes

The local and remote TTSIs became consistent.

Procedure

  • This trap message is informational only, and no action is required.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >