LACP/2/hwLacpPDUChange_clear

Message

LACP/2/hwLacpPDUChange_clear: The LACP member interface's status changed from unselected to selected. (TrunkIndex=[TrunkIndex], PortIfIndex=[PortIfIndex], TrunkId=[TrunkId], TrunkName=[TrunkName], PortName=[PortName])

Parameters

Parameter Name	Parameter Meaning
TrunkIndex	Index of an Eth-Trunk interface in static LACP mode
PortIfIndex	Index of a member interface of an Eth-Trunk interface in static LACP mode
TrunkId	ID of an Eth-Trunk interface in static LACP mode
TrunkName	Name of an Eth-Trunk interface in static LACP mode
PortName	Name of a member interface of an Eth-Trunk interface in static LACP mode

Possible Causes

Cause 1:Actor system ID changed in the received PDU
Cause 2:Actor system priority changed in the received PDU
Cause 3:Actor key changed in the received PDU
Cause 4:Actor port priority in the received PDU
Cause 5:Actor port number changed in the received PDU
Cause 6:Actor state's aggregation bit in the received PDU
Cause 7:Actor aggregation delay changed in the received PDU
Cause 8:Actor state's synchronization bit in the received PDU
Cause 9:Actor state's expire bit in the received PDU
Cause 10:Partner system ID changed in the received PDU
Cause 11:Partner system priority changed in the received PDU
Cause 12:Partner key changed in the received PDU
Cause 13:Partner port number changed in the received PDU
Cause 14:Partner port priority changed in the received PDU
Cause 15:Partner state's aggregation bit changed in the received PDU

Procedure

This trap message is informational only, and no action is required.