LACP/2/hwLacpPartnerMisconnect_active: The peer link of the LACP member interface might be incorrectly connected. (TrunkIndex=[TrunkIndex], PortIfIndex=[PortIfIndex], TrunkId=[TrunkId], TrunkName=[TrunkName], PortName=[PortName])
The peer link of an Eth-Trunk member interface in LACP mode might be incorrectly connected.
| Parameter Name | Parameter Meaning |
|---|---|
|
TrunkIndex |
Trunk index |
|
PortIfIndex |
Index of a trunk member interface |
|
TrunkId |
ID of a trunk interface |
|
TrunkName |
Name of a trunk interface |
|
PortName |
Name of a trunk member interface |
The system ID and key of the peer member interface of the Eth-Trunk member interface in LACP mode differed from those of the current working interface and could not be negotiated.
1. Check whether the peer link is incorrectly connected and added to an incorrect link aggregation group. If the peer link is incorrectly connected, go to Step 2.
2. Correctly configure the link aggregation group at the peer end, and then check whether the trap message is cleared. If the trap message persists, go to Step 3.
3. Collect alarm information and configuration information, and then contact technical support personnel.