LACP/2/hwLacpTotalLinkLoss_active

Message

LACP/2/hwLacpTotalLinkLoss_active: Link bandwidth lost totally. (TrunkIndex=[TrunkIndex], TrunkIfIndex=[TrunkIfIndex], TrunkId=[TrunkId], TrunkName=[TrunkName], Reason=[ReasonCode])

Description

All the link bandwidths were lost.

Parameters

Parameter Name	Parameter Meaning
TrunkIndex	Index of a trunk
TrunkIfIndex	Index of a trunk interface
TrunkId	ID of a trunk interface
TrunkName	Name of a trunk interface
ReasonCode	Reason why all the link bandwidths were lost or resumed.

Possible Causes

No link is selected.

Procedure

1. Run the display interface brief command to check whether the interface is Down.

If so, go to Step 2.
If not, go to Step 4.

2. Run the undo shutdown command to check whether the alarm is cleared.

If so, go to Step 8.
If not, go to Step 3.

3. Check whether the physical link is faulty.

If so, go to Step 5.
If not, go to Step 4.

4. Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] ] command to check whether there are member interfaces in the LAG.

If so, go to Step 7.
If not, go to Step 6.

5. Repair the physical link and then check whether the alarm is cleared.

If so, go to Step 8.
If not, go to Step 4.

6. Run the eth-trunk trunk-id command in the interface view and add the current Ethernet interface to the Eth-Trunk interface as required. Then, check whether the alarm is cleared.

If so, go to Step 8.
If not, go to Step 7.

7. Collect alarm information and configuration information, and then contact technical support personnel.

8. End.