DEVM/1/hwLosAlarm_clear

Message

DEVM/1/hwLosAlarm_clear: Loss of signal alarm resume. (hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot],CardID=[hwPhysicalPortInCard],PortID=[hwPhysicalPortInPort],InterfaceName=[hwPhysicalPortName],AlarmName=[hwPhysicalPortAlarmName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port
hwPhysicalPortInSlot	Slot ID
hwPhysicalPortInCard	Card ID
hwPhysicalPortInPort	Port ID
hwPhysicalPortName	Name of physical port
hwPhysicalPortAlarmName	Alarm name

Possible Causes

Cause 0:The fault triggering the alarm was rectified.
Cause 1:The fault triggering the alarm was rectified.
Cause 2:The fault triggering the alarm was rectified.
Cause 3:The fault triggering the alarm was rectified.
Cause 4:The fault triggering the alarm was rectified.

Procedure

This trap message is informational only, and no action is required.