MPLS_LSPM/2/hwMplsDynamicLabelTotalCountExceed_active

Message

MPLS_LSPM/2/hwMplsDynamicLabelTotalCountExceed_active: The dynamic label count reaches the upper limit. (hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount])

In VS mode, this log is supported only by the admin VS.

Description

Dynamic label usage reached 100%.

Parameters

Parameter Name	Parameter Meaning
DynamicLabelTotalCount	Indicates the maximum number of dynamic labels supported by the device.
DynamicLabelCurrentCount	Indicates the number of dynamic labels that are currently used on the device.

Possible Causes

A great number of LSPs were established, and all dynamic labels were used.

Procedure

1. Run the display mpls lsp statistics command to view statistics about LSPs. Re-plan the services and delete unwanted LSPs that use dynamic labels. Then check whether MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear is generated.

If this clear alarm is generated, go to step 3.
If this clear alarm is not generated, go to step 2.

2. Collect alarm information and configuration information, and then contact technical support personnel.

3. End.