LDP/4/hwMplsLdpMappingCountExceed_active: The number of LDP label mapping sent or received on the device exceeded the upper limit. (Type=[Type], VPN name=[VrfName], MappingTotalCount=[MappingTotalCount])
In VS mode, this log is supported only by the admin VS.
When the number of LDP labels in the system exceeds the upper limit, an alarm is generated, indicating that the number of labels received or sent by the system exceeds the upper limit. In this case, you need to limit the number of labels to prevent services from being affected.
| Parameter Name | Parameter Meaning |
|---|---|
|
Type |
Label type |
|
VrfName |
VRF name |
|
MappingTotalCount |
Total number of LDP labels supported by the system |
1. Run commands such as lsp-trigger, mpls ldp outbound/inbound, and mpls ldp propagate mapping to suppress the receiving of unnecessary labels, preventing services from being affected.
2. Collect alarm and configuration information, and contact technical support personnel.
3. End.