MPLS_LSPM/3/hwMplsLspLoopBack_active: LSP was looped back. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], LSPName=[LSPName])
| Parameter Name | Parameter Meaning |
|---|---|
|
SessionTunnelId |
Tunnel ID |
|
LocalLspId |
Local LSP ID |
|
IngressLsrId |
Ingress LSR ID |
|
EgressLsrId |
Egress LSR ID |
|
LSPName |
The name of LSP |
Loopback detection was enabled for a specified static bidirectional co-routed CR-LSP.
1. This trap message is informational only, and no action is required.