MPLS_LSPM/2/hwMplsOamSF_active

Message

MPLS_LSPM/2/hwMplsOamSF_active: The tunnel receives an SD2 alarm.(SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

Description

The packet loss ratio of an MPLS tunnel on the local end reached the SD2 threshold.

Parameters

Parameter Name	Parameter Meaning
SessionTunnelId	Tunnel ID
LocalLspId	Local LSP ID
IngressLsrId	ID of the ingress LSR
EgressLsrId	ID of the egress LSR
TunnelName	Tunnel name
SgnlPrtcl	Tunneling protocol
SignalledTunnelName	Tunnel alias.

Possible Causes

The packet loss ratio on the local end exceeds the SD2 threshold.

Procedure

1. Check whether the threshold is set properly.

If so, go to Step 3.
If not, go to Step 2.

2. Reconfigure the threshold.

Check whether the MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.29 hwMplsOamSFRecovery alarm is generated.

If so, go to Step 4.
If not, go to Step 3.

3. Collect alarm and configuration information, and contact technical support personnel. 4. End.