MPLS_LSPM/2/hwMplsResourceTotalCountExceed_active

Message

MPLS_LSPM/2/hwMplsResourceTotalCountExceed_active: The number of used MPLS resources reached the maximum number. (hwMplsResourceType=[ResourceType], hwMplsResourceTotalCount=[ResourceTotalCount])

In VS mode, this log is supported only by the admin VS.

Description

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.

Parameters

Parameter Name	Parameter Meaning
ResourceType	Type of MPLS resource. LDP XC Resource (1) MLDP Tree Resource (5) MLDP Branch Resource (6) LDP Remote Peer Resource (7) LDP OutSegment Resource (8) LDP Interface Resource (10)
ResourceTotalCount	Maximum number of MPLS resources supported by a device

Possible Causes

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.

Procedure

1. Check the hwMplsResourceType field and obtain the MPLS resource type.

2. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 3.

3. Collect alarm information and configuration information, and then contact technical support personnel..

4. End.