MPLS_LSPM/2/hwMplsSlotResTotalCountExceed_active

Message

MPLS_LSPM/2/hwMplsSlotResTotalCountExceed_active: The number of used MPLS resources on the interface board reached the maximum number. (hwMplsResourceType=[ResourceType], hwMplsChassis=[Chassis], hwMplsSlot=[Slot], hwMplsResourceTotalCount=[ResourceTotalCount])

In VS mode, this log is supported only by the admin VS.

Description

The number of MPLS resources on the interface board reached the maximum value.

Parameters

Parameter Name	Parameter Meaning
ResourceType	Resource type
Chassis	Number of the chassis where the interface board is located
Slot	Slot number of the interface board
ResourceTotalCount	Maximum number of resources supported by an interface board

Possible Causes

The number of used MPLS resources on the interface board reached the maximum number.

Procedure

1. Based on the MPLS resource type, check whether the resource usage exceeds the threshold.

2. Reduce the configurations or messages that trigger the creation of related resources to reduce the usage of MPLS resources of the corresponding type. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 3.

3. Collect alarm and configuration information, and contact technical support personnel.

4. End