MPLS_LSPM/2/hwMplsStaticCRLspDown_clear

Message

MPLS_LSPM/2/hwMplsStaticCRLspDown_clear: Static CR-LSP went Up. (LspIndex=[LspIndex], InSegmentIndex=[InSegmentIndex], OutSegmentIndex=[OutSegmentIndex], OutIfIndex=[OutIfIndex], LspName=[LspName], LspStatus=[LspStatus], OutIfName=[OutIfName], InIfIndex=[InIfIndex], InIfName=[InIfName], DownReason=[DownReason])

Parameters

Parameter Name	Parameter Meaning
LspIndex	Indicates the index of the LSP.
InSegmentIndex	Indicates the inSegment index of a static CR-LSP.
OutSegmentIndex	Indicates the outSegment index of a static CR-LSP.
OutIfIndex	Indicates the outbound interface index of a static CR-LSP.
LspName	Indicates the name of a static CR-LSP.
LspStatus	Indicates the status of a static CR-LSP.
OutIfName	Indicates the outbound interface name of a static CR-LSP.
InIfIndex	Indicates the inbound interface index of a static CR-LSP.
InIfName	Indicates the inbound interface name a static CR-LSP.
DownReason	Indicates the reason that the static CR-LSP down.

Possible Causes

Cause 2:static CR-LSP up
Cause 7:Static CR-LSP configuration delete

Procedure

This trap message is informational only, and no action is required.