MPLS_LSPM/2/hwMplsStaticLspDown_clear

Message

MPLS_LSPM/2/hwMplsStaticLspDown_clear: Static LSP's status changes. (LspIndex=[LspIndex], InSegmentIndex=[InSegmentIndex], OutSegmentIndex=[OutSegmentIndex], OutIfIndex=[OutIfIndex], LspName=[LspName], LspStatus=[LspStatus], OutIfName=[OutIfName], InIfIndex=[InIfIndex], InIfName=[InIfName], ReasonIndex=[ReasonIndex], Reason=[Reason])

Parameters

Parameter Name	Parameter Meaning
LspIndex	Indicates the index of the LSP.
InSegmentIndex	Indicates the inSegment index of a static LSP.
OutSegmentIndex	Indicates the outbound interface index of a static LSP.
OutIfIndex	Indicates the outbound interface index of a static LSP.
LspName	Indicates the name of a static LSP.
LspStatus	Indicates the status of a static LSP.
OutIfName	Indicates the outbound interface name of a static LSP.
InIfIndex	Indicates the inbound interface index of a static LSP.
InIfName	Indicates the inbound interface name a static LSP.
ReasonIndex	Indicates the reason that the static LSP down.
Reason	Alarm cause.

Possible Causes

Cause 1:Static LSP up
Cause 2:Static LSP configuration delete

Procedure

Cause 1:Static LSP up
No action is required.
Cause 2:Static LSP configuration delete
Recover the static LSP configuration.