RM/2/hwNhmCyclicIterateRestrain_active

Message

RM/2/hwNhmCyclicIterateRestrain_active: Cyclic iteration was suppressed. (restrainType=[restrainType], vpnName=[vpnName], nexthop=[nexthop], protocolType=[protocolType])

Description

Cyclic iteration was suppressed.

Parameters

Parameter Name	Parameter Meaning
restrainType	Type of the alarm
vpnName	Name of the next-hop VPN instance
nexthop	Next-hop IP address
protocolType	Protocol type

Possible Causes

A configuration error occurred.

Procedure

1. Run the display rm ip iid original-nexthop command in the diagnostic view to check detailed information about route next hops. Determine and delete the routes that encountered cyclic recursion. Then, check whether the alarm is cleared. That is, check whether the matching clear alarm hwNhmCyclicIterateRestrainClear is generated.

If the clear alarm is generated, go to Step 3.
If the clear alarm is not generated, go to Step 2.

2. Collect alarm information and configuration information, and then contact technical support personnel.

3. End.