NTP/3/hwNtpSynchronizationFailure_active

Message

NTP/3/hwNtpSynchronizationFailure_active: NTP synchronization state changed. (State = [state], SynchronizationSourceAddress = [source])

In VS mode, this log is supported only by the admin VS.

1. The NTP server is incorrectly configured. 2. The NTP server cannot be connected or is disconnected abnormally. 3. The NTP server breaks down

Parameter Name	Parameter Meaning
state	NTP clock synchronization status
source	NTP clock synchronization source

Cause 1: Peer become unreachable.
Check whether the peer end is reachable.
Cause 2: Peer was deleated by configuration.
Check the configuration.
Cause 3: Peer went to unsynch state
Check the reason why the peer clock cannot be synchronized.
Cause 4: Peer source is unslectable
The offset, delay, and precision of the peer clock are not within the acceptable range.