BRASAAA/4/hwOnlineUserNumUpperLimitAlarm_active
Message
BRASAAA/4/hwOnlineUserNumUpperLimitAlarm_active: The number of users on the device reached the upper threshold. (MaxUserThreshold=[threshold])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
threshold |
Upper limit of the number of login users on a device, in percentages. If the value is 80,the threshold is 80% |
Possible Causes
Cause 1: A large number of users logged in to the device.
Cause 2: The configured upper limit was too low.
Procedure
1.Run the display this command in the system view to check whether the upper limit is appropriate.
- If the upper limit is too low, go to Step 2.
- If the upper limit is appropriate, go to Step 3.
2.Run the user-warning-threshold upper-limit command to reconfigure the upper limit.
3.Run the display access-user command in the system view to view the current number of login users.
- If the number reaches or approaches the upper limit, add more boards.
- If the number is an appropriate value, go to Step 4.
4.Collect trap, log, and configuration information, and contact technical support personnel.
5.End.