DEVM/1/hwOptCfgNotMatch_active

Message

DEVM/1/hwOptCfgNotMatch_active: The partial function of optical module failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], ReasonDescription=[ReasonDescription])

Description

After the optical module was inserted, its configuration was not supported.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Index of the physical entity.
EntPhysicalIndex	Index of the physical entity.
EntPhysicalName	Name of the physical entity.
EntityTrapFaultID	Error code.
ReasonDescription	Indicates the description of the possible cause.

Possible Causes

After the optical module was inserted, its configuration was not supported.

Procedure

1.Reconfigure the FEC mode, signal modulation mode, attenuation value, or wavelength number on the interface, and check whether the alarm is cleared.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.