DEVM/1/hwOpticalRemove_active

Message

DEVM/1/hwOpticalRemove_active: The optical module was removed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Description

The optical module was removed.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Index of the physical entity.
EntPhysicalIndex	Index of the physical entity.
EntPhysicalName	Name of the physical entity.
EntityTrapFaultID	Error code.
Reason	Indicates the description of the possible cause.

Possible Causes

The optical module was removed.

Procedure

1. Install an optical module and check if the alarm is cleared.

If the alarm is cleared, go to step 3.
If the alarm persists, go to step 2.

2. Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.