DEVM/3/hwPhysicalModeInconsistentAlarm_active

Message

DEVM/3/hwPhysicalModeInconsistentAlarm_active: Port physical work mode inconsistent alarm. (hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName], hwPhysicalInconsistentAlmType=[hwPhysicalInconsistentAlmType])

In VS mode, this log is supported only by the admin VS.

Description

The alarm indicates that the actual working mode of the interface is inconsistent with the configured working mode.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.
hwPhysicalInconsistentAlmType	Indicates the alarm type: 0: The working mode is forcibly switched from FlexE to Ethernet. 1: The working mode is forcibly switched from Ethernet to FlexE. 2: The working mode is auto-negotiated as Ethernet from FlexE.

Parameter Name

Parameter Meaning

hwPhysicalPortIfIndex

Index of physical port.

hwPhysicalPortName

Name of physical port.

hwPhysicalInconsistentAlmType

Indicates the alarm type:

0: The working mode is forcibly switched from FlexE to Ethernet.

1: The working mode is forcibly switched from Ethernet to FlexE.

2: The working mode is auto-negotiated as Ethernet from FlexE.

Possible Causes

The Actual working mode of the interface is inconsistent with the configured working mode.

Procedure

Restore the physical working mode consistent with the upper layer on the port where the alarm occurs.1. Restore the underlying working mode of the ETH port to the ETH mode; 2. Restore the underlying working mode of the FLEXE port to the FLEXE mode.