DEVM/2/hwPhysicalPortCrcError_active

Message

DEVM/2/hwPhysicalPortCrcError_active: Crc error alarm.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],hwPhysicalPortName=[hwPhysicalPortName],hwPhysicalPortCrcErrorStatistics=[hwPhysicalPortCrcErrorStatistics],hwPhysicalPortCrcErrorHighThreshold=[hwPhysicalPortCrcErrorHighThreshold],hwPhysicalPortCrcErrorLowThreshold=[hwPhysicalPortCrcErrorLowThreshold],hwPhysicalPortCrcErrorInterval=[hwPhysicalPortCrcErrorInterval])

In VS mode, this log is supported only by the admin VS.

Description

An alarm is generated when the number of alarms is set higher than the set time.

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Interface index(es) of physical port(s) present on the device.
hwPhysicalPortName	Interface name of physical port(s) present on the device.
hwPhysicalPortCrcErrorStatistics	Crc error statistics value.
hwPhysicalPortCrcErrorHighThreshold	Crc error alarm high threshold.
hwPhysicalPortCrcErrorLowThreshold	Crc error alarm low threshold.
hwPhysicalPortCrcErrorInterval	Crc error alarm interval time(unit is second).

Possible Causes

Cause 1: The optical module failed.
Cause 2: The optical fiber failed.

Procedure

1.Replace the optical module and check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 2.

2.Replace the fiber, check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 3.

3.Collect the alarm information, log information, and configuration information, and then contact technical support personnel.

4.End.