PIC/2/hwPortGroupTransModeDiff_active

Message

PIC/2/hwPortGroupTransModeDiff_active: The interfaces in this group worked in different transmission modes.(IfIndex=[IfIndex], SlotId=[SlotId], CardId=[CardId], PortId=[PortId], ReasonDescription=[ReasonDescription])

In VS mode, this log is supported only by the admin VS.

Description

The interfaces of the same group did not work in the same transmission mode.

Parameters

Parameter Name	Parameter Meaning
IfIndex	Index of physical port.
SlotId	Slot ID.
CardId	Card ID.
PortId	Port ID.
ReasonDescription	Reason Description.

Possible Causes

Some interfaces in this group worked in LAN mode while some worked in WAN mode.

Procedure

1.Run the set transfer-mode command to configure all the interfaces in this group to work in the same transmission mode.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.