DEVM/1/hwPowerInvalid_clear-136962

Message

DEVM/1/hwPowerInvalid_clear: The power module resumed from total failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136962, Reason=Over-input-voltage occurred on the power module.)

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The Input-voltage of the power module is normal.

Procedure

This trap message is informational only, and no action is required.