DEVM/1/hwPowerInvalid_active-136966

Message

DEVM/1/hwPowerInvalid_active: A power module experienced a complete failure.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136966, Reason=The power module was installed but not powered on.)

In VS mode, this log is supported only by the admin VS.

Description

Power invalid.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The power module was installed but not powered on.

Procedure

1. Power on the power supply module. If the alarm persists, collect alarm information, log information and configuration information, and then contact technical support personnel.

2. End.