DEVM/1/hwPowerInvalid_clear

Message

DEVM/1/hwPowerInvalid_clear: The power module resumed from total failure. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

Cause 136960:The Power is In Position.
Cause 136961:The power supply on the power module is normal.
Cause 136962:The Input-voltage of the power module is normal.
Cause 136963:The Input-voltage of the power module is normal.
Cause 136964:The temperature of power module is normal.
Cause 136965:The input fuse on the AC power module close.
Cause 136966:The power module was installed and powered on.
Cause 136967:The output of the power module is ok.
Cause 136968:The Output-voltage of the power module is normal.
Cause 136969:The Output-voltage of the power module is normal.
Cause 136973:The power fix ok.
Cause 136974:The device power is sufficient.
Cause 136975:The power module is match with the device.
Cause 136976:The circuit breakers on the power module are switched on.
Cause 136977:The input voltage of the power supply module is normal(1+1-).
Cause 136978:The input voltage of the power supply module is normal(1+1-).
Cause 136979:The input voltage of the power supply module is normal(2+2-).
Cause 136980:The input voltage of the power supply module is normal(2+2-).
Cause 136982:The power type does not match the type of the backplane.
Cause 136986:The A plane power supply on the power module is normal.
Cause 136987:The B plane power supply on the power module is normal.

Procedure

This trap message is informational only, and no action is required.