DEVM/1/hwPowerRemove_active

Message

DEVM/1/hwPowerRemove_active: A power module was removed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Description

A power module was removed.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reson.

Possible Causes

The power module was removed.

Procedure

1.Check whether the power supply module is installed.

If so, check whether the power supply module is installed securely. Then, go to Step 2.
If not, install the power supply module.

2.If the alarm persists, replace the power supply module.

3.If the alarm still exists, collect trap, log, and configuration information, and contact technical support personnel.

4.End.