PIC/3/hwPtimAlarm_clear

Message

PIC/3/hwPtimAlarm_clear: The trace identifier mismatch in the higher order path alarm resume. (hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot],CardID=[hwPhysicalPortInCard],PortID=[hwPhysicalPortInPort],HpID=[hwSDHHpPerfCurrentHpIndex],InterfaceName=[hwPhysicalPortName])

Parameters

Parameter Name	Parameter Meaning
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwSDHHpPerfCurrentHpIndex	High-order path ID.
hwPhysicalPortName	Name of physical port.

Possible Causes

Cause 0:The fault triggering the alarm was rectified.
Cause 1:The fault triggering the alarm was rectified.
Cause 2:The fault triggering the alarm was rectified.
Cause 3:The fault triggering the alarm was rectified.
Cause 4:The fault triggering the alarm was rectified.
Cause 5:The fault triggering the alarm was rectified.

Procedure

This trap message is informational only, and no action is required.