PTP/4/hwPtpPassiveMeasureOverflow_clear: The time offset of the passive port is normal. (hwPtpPortName=[hwPtpPortName], hwPtpPortIfIndex=[hwPtpPortIfIndex], hwPtpPortRingFiberLengthChangeValue=[hwPtpPortRingFiberLengthChangeValue], hwPtpPortRingFiberLengthChangeValueFlag=[hwPtpPortRingFiberLengthChangeValueFlag], hwPtpPassiveAlarmThreshold=[hwPtpPassiveAlarmThreshold])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwPtpPortName |
Name of the current port. |
|
hwPtpPortIfIndex |
Index of the current port. |
|
hwPtpPortRingFiberLengthChangeValue |
New time offset caused by the fiber length change of the current port. (unit: ns) |
|
hwPtpPortRingFiberLengthChangeValueFlag |
Plus or minus sign of the new time offset caused by the fiber change of the current port. The value can be: Minus sign (0). Positive sign (1). |
|
hwPtpPassiveAlarmThreshold |
Passive monitoring threshold configured on the current device. |
A new asymmetric correction value was set on the port where the passive measure overflow alarm was generated.
This log message is informational only, and no action is required.