DEVM/4/hwRATEOFTRAFFICRising_active

Message

DEVM/4/hwRATEOFTRAFFICRising_active: Rate of traffic overrun. (EntityPhysicalIndex=[EntityPhysicalIndex], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

Description

Interface board traffic is larger than the threshold.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityTrapFaultID	Indicates the error code.
Reason	Reason.

Possible Causes

Cause 138240: The inbound traffic of the NP exceeded the bandwidth usage threshold. The default threshold is 80 percent.
Cause 138241: The outbound traffic of the NP exceeded the bandwidth usage threshold. The default threshold is 80 percent.
Cause 138242: The usage of IP packet reassembly resources exceeded threshold.
Cause 138243: Transmission flow bandwidth usage of enhance service channel exceeded threshold.
Cause 138244: Receiving flow bandwidth usage of enhance service channel exceeded threshold.
Cause 138247: The NP performance usage exceeded threshold.
Cause 138248: The NP data channel ingress bandwidth usage exceeded 80 percent.
Cause 138249: The NP data channel egress bandwidth usage exceeded 80 percent.
Cause 138250: The NP loopback channel bandwidth usage exceeded 80 percent.
Cause 138251: The NP chip is under link back pressure status.
Cause 138252: IP data packets failed to be reassembled.

Procedure

Cause 138240: The inbound traffic of the NP exceeded the bandwidth usage threshold. The default threshold is 80 percent.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138241: The outbound traffic of the NP exceeded the bandwidth usage threshold. The default threshold is 80 percent.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138242: The usage of IP packet reassembly resources exceeded threshold.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138243: Transmission flow bandwidth usage of enhance service channel exceeded threshold.
Collect the trap information, log information, and configuration information, and then contact technical personnel.
Cause 138244: Receiving flow bandwidth usage of enhance service channel exceeded threshold.
Collect the trap information, log information, and configuration information, and then contact technical personnel.
Cause 138247: The NP performance usage exceeded threshold.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138248: The NP data channel ingress bandwidth usage exceeded 80 percent.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138249: The NP data channel egress bandwidth usage exceeded 80 percent.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138250: The NP loopback channel bandwidth usage exceeded 80 percent.
1.Adjust network topology and then check whether the fault is cleared.
- If so, go to Step 3.
- If not, go to Step 2.
2.Collect the trap information, log information, and configuration information, and then contact technical personnel.

3.End.
Cause 138251: The NP chip is under link back pressure status.
Collect the trap information, log information, and configuration information, and then contact technical personnel.
Cause 138252: IP data packets failed to be reassembled.
Collect the trap information, log information, and configuration information, and then contact technical personnel.