ISIS/1/hwRouteLoopDetected_clear

Message

ISIS/1/hwRouteLoopDetected_clear: The routing loop is cleared. (LoopType=[loopType], DetectProtocol=[detectProtocol], DetectProtocolAttr=[detectProtocolAttr], RedistributeID1=[redistributeID1], RedistributeID2=[redistributeID2])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
loopType	Loop detection type.
detectProtocol	Type of the protocol that detects a routing loop.
detectProtocolAttr	Information about the loop detection protocol.IS-IS and OSPF are the address family and protocol process ID. BGP is an address family or sub-address family.
redistributeID1	Re-advertise device ID 1.IS-IS corresponds to the system ID of the process, and OSPF corresponds to the router ID of the process.
redistributeID2	Re-advertise device ID 2.IS-IS corresponds to the system ID of the process, and OSPF corresponds to the router ID of the process.

Possible Causes

The alarm for the routing loop detected by the device is cleared.

Procedure

This trap message is informational only, and no action is required.