MPLS_RSVP/2/hwRsvpTeHelloLost_active

Message

MPLS_RSVP/2/hwRsvpTeHelloLost_active: The RSVP Hello neighbor is lost. (IpAddress=[ipaddr])

Description

The RSVP neighbor relationship was interrupted.

Parameters

Parameter Name Parameter Meaning

ipaddr

Indicates the address of the RSVP neighbor.

Possible Causes

The RSVP neighbor or the link over which the RSVP neighbor relationship is established became faulty.

Procedure

1. Check whether the physical link or the RSVP neighbor is faulty.

  • If so, repair the physical link or restart the RSVP neighbor.
  • If not, go to step 2.

2. Run the display ip routing-table command to check whether there is a route to the RSVP neighbor.

  • If so, go to step 3.
  • If not, configure an IGP to advertise routes.

3. Collect alarm information and configuration information, and then contact technical support personnel.

4. End.

Parent Topic: MPLS_RSVP
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >